Tembok Carpenter & Building Services logo

Tell us about your project.

Tembok Carpenter & Building Services

Built-In Storage in Kent

Storage that disappears into the architecture — push-to-open doors, hidden compartments and clever pull-outs.

What's Included

Built-In Storage — The Tembok Way

Storage is found in the volume a house already wastes, in thick walls, recesses, utility corners and the space above doorways.

  • Floor-to-ceiling units
  • Hidden door cabinetry
  • Boot rooms & utility joinery
  • Custom shelving

Looking for space the house is not using

Most homes have pockets of empty volume: the void beside a boxed-in soil pipe, the wall above a hall door, the end of a landing or the corner of a utility room. Each can hold a cupboard sized exactly to it.

  • Over-door cupboards on landings and in halls
  • Recessed shelving in stud walls
  • Boot room benches with lockers above
  • Floor-to-ceiling utility cupboards

Doors that disappear into the wall

Hidden or jib doors are painted or papered to match the wall, with push-to-open catches instead of handles. They suit hallways and living rooms where a run of cupboard fronts would crowd the space.

Meters, stop taps and boilers stay reachable

Storage often ends up around services. Gas and electric meters, stop taps, consumer units and boiler controls must stay accessible, so we design removable panels or dedicated doors and check the position at the survey.

Keeping utility cupboards ventilated

Cupboards that house washing machines, tumble dryers or boilers need air movement. Vented doors, plinth grilles or gaps at the top follow the appliance maker's guidance so heat and moisture can escape.

Factors in a built-in storage quote

Small cupboards can still involve a lot of fitting work.

  • Whether walls need opening up to create a recess
  • Hidden doors and push-to-open hardware
  • Access panels around meters and stop taps
  • Ventilation needed for appliances or boilers
  • Painted, papered or timber finishes

What we cover

Storage built into the fabric of the house

Built-in storage uses the parts of a home that usually go to waste: chimney-breast alcoves, the low triangle under the eaves, loft voids, the space beside a stair or the end wall of a landing. Because the units are scribed to the room, they can run floor to ceiling, follow a sloping ceiling or sit flush behind a hidden door that looks like panelling.

Before anything is drawn we survey the space properly. Solid brick, stud partitions and lath and plaster each take fixings differently, so wall construction decides how heavy shelving can be supported. We note skirting and coving, which can be cut back or carried across the face of a unit, and the position of sockets, switches and radiators, which may need moving or working around. Old houses rarely have square corners or level floors, so awkward angles are measured and allowed for rather than hidden with oversized filler strips.

  • Alcove cupboards and shelving either side of a chimney breast
  • Under-eaves drawers and cupboards in sloping rooms and loft voids
  • Hidden-door cabinetry and jib doors that blend into walls
  • Boot rooms and utility joinery with hanging, shelving and bench seats
  • Floor-to-ceiling units and custom shelving for books and display

FAQs

Built-In Storage — frequently asked

Can built-in storage go into a sloping ceiling or loft void?

Yes. Under-eaves space suits low drawers and cupboards cut to follow the slope, and accessible loft voids can be lined and fitted with doors or shelving where the structure allows.

What happens to skirting boards and coving when units are fitted?

It depends on the look you want. Skirting can be cut back so the unit sits tight to the wall, or a matching plinth can carry the line across; coving can be scribed around or finished against a top filler.

Do sockets and radiators have to be moved?

Not always. We note them at the survey and either design around them, add access panels, or suggest moving them with the right trade where that gives a better result.

Can storage be hidden behind a door that matches the wall?

Yes. Jib or hidden doors can be finished with the same panelling, paint or wallpaper as the surrounding wall, with concealed hinges and push-to-open catches.

Can a cupboard be built around a boiler?

Usually, provided the maker's clearances and ventilation are kept and the boiler can still be serviced. We check the installation details at the survey.

What is a jib door?

A door finished to match the wall around it, often with no visible handle, so a cupboard or store is concealed.

Is there room for storage above a doorway?

Often there is a useful gap between the door head and the ceiling, especially on landings and in older houses with tall rooms.

Let's Talk

Ready to Get Started?

Get in touch for a free, no-obligation quote on your next project.

CallWhatsApp